* Due to Rapid Changing Steel Prices Please Call (800) 726-9091 Ext 1 to check for Current Pricing *

WW Chaparral Tapered Round Pens

* Prices Plus Freight & Taxes , Prices Subject to Change W/Out Notice, All Prices Are CASH, Check or Wire Prices *

Chaparral Features:

• 1.9 high tensile 16 gauge tubing with 50,000 P.S.I. yield strength
• All components feature self-contained connecting pins for easy interlocking
• Spring-activated gate latches and 2" standard pipe hinges
• All WW panel and gate joints are saddle cut for extra strength
• Below Prices are for grey powder coat finish
• Call for pre-galvanized or hot dipped galvanized prices
  
  
  

I. Chaparral Tapered Panel Round Pens: (8' panels) all Gates are 9'6" Frames: No Wood

RPP CHAP 8' (LESS WOOD) # 4391-068-000	Retail	RP GATE CHAP 8' X 9'6" (LESS WOOD) # 4391-068-000	Retail		Retail	Special
1.) 40 foot  =  15  panels x	$ 435	each  + 1 gate  panel  x	$ 809	each	$ 7,440	$ 5,630
2.) 50 foot  =  19  panels x	$ 435	each  + 1 gate  panel  x	$ 809	each	$ 9,576	$ 6,960
3.) 60 foot  =  23  panels x	$ 435	each  + 1 gate  panel  x	$ 809	each	$ 11,412	$ 8,300

II. Chaparral Panel Round Pens: (8' panels) all Gates are 9'6" Frames: Steel

RPP CHAP 8' SHEET METAL 24" 4891-068-200	Retail	RP GATE CHAP 8' X 9'6" SHEET METAL 24" # 4391-068-000	Retail		Retail	Special
1.) 40 foot  =  15  panels x	$ 666	each  + 1 gate  panel  x	$ 1,058	each	$ 11,670	$ 8,490
2.) 50 foot  =  19  panels x	$ 666	each  + 1 gate  panel  x	$ 1,058	each	$ 14,484	$ 10,535
3.) 60 foot  =  23  panels x	$ 666	each  + 1 gate  panel  x	$ 1,058	each	$ 17,298	$ 12,580

“Finally...the Perfect Round Pen !” 6 to 8” clearance room for your feet & legs from wall. 8’ Sections to make a smoother circumference. Solid in the tapered section to  protect legs & push horses off wall Wood or Lumber on bottom 36” Tall Not Solid on the top because, in the winter your ground in the shadow, freezes & Stays frozen. 9’6” high frame, to ride through & to get your equipment in.

WOOD CUT SHEET: per Panel/Gate	(1) 2” x 6” x 91 1/4”	(1) 2” x 12” x 88 7/8”
Pressure Treated Lumber Recommended	(1) 2” x 12” x 90 1/5”	(18) 3/8" x 2 1/4" Carriage Bolts - Nuts - Washer - Sets